Bushman Posted December 20, 2016 Share Posted December 20, 2016 recently had both front 'coffin' arms replaced by Nick at Auto 2000 in Bedford, ( good job mate, thanks) and then the tracking set up by RG also in Bedford using his new laser system and although it tracks better than it ever did, I seem to remember seeing a post on here sometime back about using a slightly different tracking setup for 'R's and GT4s or when using spacers that improved steering response and reduced understeer. can anyone in Caymanland offer any advice please. Link to comment Share on other sites More sharing options...
Popular Post PorscheGT4 Posted January 16, 2017 Popular Post Share Posted January 16, 2017 7mm front spacers and -1.5 front camber is a good place to start with zero toe in. 2 Link to comment Share on other sites More sharing options...
Founder Beanoir™ Posted January 17, 2017 Founder Share Posted January 17, 2017 (edited) ^ David's advice is what I went with @Bushman - gives it a more playful rear end and removes the slight bias of understeer. I'd recommend going with the spacers. You may struggle to get as far as -1.5 camber without drilling slots for the top mounts, mine is -1.0 without modifying the holes. Edited January 17, 2017 by Beanoir 1 Link to comment Share on other sites More sharing options...
.JPG.9d9d15611a998fe2499c03cdd18aa8fb.thumb.JPG.f2150934beef2488dfd2bffe61a65fc8.JPG)
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now